- Robbins Manufacturing, Inc. has the ability to powder coat paint
virtually any metal part. The powder coat system includes the
following features:
- The conveyor is capable of handling loads of 400 pounds per hook
with a maximum part envelope of 5 feet wide by 5 feet high by 8 feet
long; one of the largest in the state.
- The ten-stage, all stainless steel construction, surface
pretreatment system, features an acid deoxidizing stage, for the
treatment of welded, and laser-cut parts. Products fabricated
using these processes cause a thick heat scale and iron oxide to
form on and around the cut edges. This stage eliminates the
need for wire brushing or grinding to assure proper paint adhesion.
- A reverse osmosis system produces demineralized water, which is
used in all stages and multiple rinses have been implemented to
maximize usage from the cleaners, further reducing the amount of
discharge to our waste treatment and results in an economical and
environmentally friendly system.
- Paint application is accomplished through the utilization of
dual interchangeable ITW Gema "state-of-the-art" Vortech booths
using ten powder guns. ITW Gema is the "World Leader in Powder
Coating Systems". The Vortech powder coating booths are
designed to minimize the time required for color changes which
results in a highly flexible system to meet your needs at a
competitive price.
- The powder collection unit features high efficiency cartridge
filters which recycle 96% of the over-spray, maximizing the yield of
the powders and minimizing waste.
|
|
